PC3 Programmer/Black Box

[RedLeader]

I was trying to update the firmware on th power commander in my 636 and apparently I need the programmer/black box to do this (http://i853.photobucket.com/albums/ab95/dragbikercr/pc3reprogrammer.jpg). Apparently if the firmware is below 1.0.2 (which mine is) it wont do it without the programmer. I think it comes with all ignition modules as well.
Does anyone have one of these or know of anyone who may have one of these? If I could borrow one from someone it would be ideal. I can probably take it down to one of the shops in town that does power commander stuff once it warms up, but I would rather do it myself.

[GreenMachine]

I don't know of anyone with a power commander.  My bikes are all carburetted.  SPL would probably be your best source, but I think they closed down.  Motosource might be able to help.

Here's to hoping that someone on here has that equipment.

[Highlander]

I may have what your looking for I had it to clear the PC3 on the bikes...I have to dig thru some boxes I moved after my wife passed away a couple of years ago and boxed everything up.

[RedLeader]

That would be amazing. Thank you! Let me know if you happen to find it.

[Highlander]

Sorry a bit slow at getting around , yes I have it. Funny I swear I went thru my rolling tool chest before, but I looked again first drawer where I store cables and there it was.