Main Menu

OK, NOW I WENT AND DID IT! BOUGHT A PROJECT TRACK BIKE

Started by youngster775, November 08, 2009, 07:37:34 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 4 5
User actions

n10sive

#15
November 12, 2009, 08:31:04 AM
Quote from: Justino on November 12, 2009, 12:39:01 AM
Why is the high beam selector switch still there?

That is the  :o "OMFG THIS THING IS FAST" switch ;D
BMW R1200RT, 03 636 Track Bike

youngster775

#16
November 12, 2009, 08:44:56 AM
I REALLY wanted to lose that switch, but the wire goes into the harness. I was advised not to cut any wires.
2006 R1-50th,2004 R6 trackbike,2005 GSXR-600,2001 ZX6 trackbike,2005 YZ-250F

99 900ss duc

#17
November 12, 2009, 10:38:21 AM
Quote from: Justino on November 12, 2009, 12:39:01 AM
Why is the high beam selector switch still there?

that is the switch for the ejection seat

youngster775

#18
November 12, 2009, 01:41:20 PM
Quote from: XXXXL on November 12, 2009, 10:38:21 AM
Quote from: Justino on November 12, 2009, 12:39:01 AM
Why is the high beam selector switch still there?

that is the switch for the ejection seat
NO, THATS THE ERECTION SWITCH ;D
2006 R1-50th,2004 R6 trackbike,2005 GSXR-600,2001 ZX6 trackbike,2005 YZ-250F

99 900ss duc

#19
November 12, 2009, 02:01:12 PM
Quote from: youngster775 on November 12, 2009, 01:41:20 PM
Quote from: XXXXL on November 12, 2009, 10:38:21 AM
Quote from: Justino on November 12, 2009, 12:39:01 AM
Why is the high beam selector switch still there?

that is the switch for the ejection seat
NO, THATS THE ERECTION SWITCH ;D


mine is right hand twist grip!

Justin

#20
November 12, 2009, 11:00:20 PM
Quote from: youngster775 on November 12, 2009, 08:44:56 AM
I REALLY wanted to lose that switch, but the wire goes into the harness. I was advised not to cut any wires.
just disconnect.  Lots of stuff goes into the wiring harness.  If you don't need it doesn't need to be connected.

zipbyu

#21
November 13, 2009, 07:41:43 AM
There shoud be a plug some where for it to be disconnect.  Don't listen to the others. I think that are getting our site confused with BARF. 

Adiggity

#22
November 13, 2009, 09:22:58 AM
Quote from: Justino on November 12, 2009, 12:39:01 AM
Why is the high beam selector switch still there?
For the horn.....duh. The horn is a must on a track bike, just ask Jerome!

Justin

#23
November 13, 2009, 07:05:57 PM
DISCONNECT IT PAUL.  The headlight don't work the engine, dude.

youngster775

#24
November 13, 2009, 07:25:06 PM
A BIG SHOUT OUT TO ERIC FOR REALLY HOOKING ME UP WITH A FIBERGLASS RACE KIT! THANKS MAN!
NOW OFF TO FIGURE OUT HOW TO DISCONNECT THE HORN WITHOUT CUTTING IT... ;)
2006 R1-50th,2004 R6 trackbike,2005 GSXR-600,2001 ZX6 trackbike,2005 YZ-250F

n10sive

#25
November 13, 2009, 07:41:27 PM
leave it on! Then you can go *meep* *meep* "coming through...make a hole!" as you get faster and faster on that thing ;D
BMW R1200RT, 03 636 Track Bike

youngster775

#26
November 13, 2009, 08:21:52 PM
Quote from: n10sive on November 13, 2009, 07:41:27 PM
leave it on! Then you can go *meep* *meep* "coming through...make a hole!" as you get faster and faster on that thing ;D
IF I LEAVE IT ON, THEN I'LL HAVE TO GET ONE OF THOSE HORNS THAT GO AAAROOOOGAHHH!!!!!  ;D
2006 R1-50th,2004 R6 trackbike,2005 GSXR-600,2001 ZX6 trackbike,2005 YZ-250F

Rick Bay (BRA)

#27
November 13, 2009, 09:51:47 PM
That's very cool Paul! I wanna see this bike on the track. Congratulations. ;)

youngster775

#28
November 13, 2009, 10:45:09 PM
thanks! right now I'm working really hard to get the fiberglass tail to fit! and thats the easiest mod.... if you were watching me, you'd call me "THE BUTCHER"  :D
2006 R1-50th,2004 R6 trackbike,2005 GSXR-600,2001 ZX6 trackbike,2005 YZ-250F

Rick Bay (BRA)

#29
November 14, 2009, 12:25:02 PM
You gotta it THE BUTCHER!!!  :P :P :P
What does it mean. But the way?  ???
Print
Go Up Pages 1 2 3 4 5
User actions